8
SHOCK ABSORBER, SWINGARM
Alternative 1
–
Tension the spring to the prescribed position by turning the adjusting ring.
Guideline
Spring preload
Standard
Full payload
Hook wrench (T106S) (
Alternative 2
201698-10
–
Tension the spring to the position measured during dismantling by turning the
adjusting ring.
p. 259)
Warning
Danger of accidents Modifications to the suspension settings can seri-
ously alter the vehicle's ride behavior.
–
Extreme modifications to the adjustment of the suspension compo-
nents can cause a serious deterioration in the handling characteris-
tics and overload some components.
–
Only make adjustments within the recommended range.
–
After making adjustments, ride slowly at first to get the feel of the
new ride behavior.
3 clicks
6 clicks
32