6
FORK, TRIPLE CLAMP
6.5
Checking the fork legs
–
Clamp the outer tube in the area of the lower triple clamp.
Clamping stand (T612S) (
–
Remove dust boot
201512-10
–
Remove lock ring
Info
The lock ring has a beveled end where a screwdriver can be applied.
201513-10
–
Remove seal ring
201514-10
–
Unclamp the outer tube.
–
Heat up the outer tube in the area of sliding bushing
Guideline
50 °C (122 °F)
–
Strike the lower edge of the outer fork tube on a wooden board.
Sliding bushing
201515-10
Condition
The fork legs have been disassembled.
–
Check the inner tube and the axle clamp for damage.
»
If damage is found:
–
Change the fork leg.
201516-10
p. 260)
.
3
.
4
. Remove support ring
5
6
must fall out of its seat.
7
.
.
7
19