Can Devices Connect To My Network - Fluke AIRCHECK User Manual

Can Devices Connect to My Network?

Use the tester to verify connectivity.
To connect to a secure network, the tester must have a profile that includes
security credentials. If credentials are not available, the softkey shows as
Connect*.
Can a device connect as a client to my
network (SSID)?
Can a device connect to an access point
(BSSID)?
If a device cannot connect to a network
or access point, where does the
connection procedure fail?
Can a device ping a network device?
Does the network interface card in a
client operate correctly?
See page 29.
Select Networks, highlight a network, then press
Select Access Points, highlight an access point, then press
page 68.
Look at the connection log. See page 71.
Do a ping test. See page 72.
From the home screen, select Clients to see if the client transmits probe request
frames and to see basic settings such as the channel and SSIDs the client uses in
probes. See page 76.
What You Can Learn About Your Network
Note


Connect. See page 68.

Connect. See
17