Fluke AIRCHECK User Manual page 115

Message
802.1X: Server certificate unverified
802.1X: Server certificate is bad
DHCP: Timeout occurred
(without the message DHCP: Success after this
one)
DHCP: No offer received
Static IP: ARP received. Address already in use
Appendix A: Log Messages for Connections that Fail
Possible Reasons for the Connection Failure
Ignore this message if you did not select the option Check Server
Certificate in the profile in AirCheck Manager.
The option Check Server Certificate was selected in the profile in AirCheck
Manager, but an incorrect certificate was loaded into the tester.
•
The access point could not communicate with the external DHCP server.
•
The access point has an internal DHCP server, but it is disabled.
•
The DHCP server is at its limit for the number of users.
• The tester and the access point are both configured for WEP security,
but they have different key settings.
When this follows the message DHCP: Timeout occurred, see the causes
above.
The option Manual (Static) was selected in the profile in AirCheck
Manager, but a duplicate IP address was found on the network.
107