Fluke AIRCHECK User Manual page 48

AirCheck Wi-Fi Tester
Users Manual
Manage profiles / network
passwords
40
Table 2. Settings on the Tools Menu (continued)
Allows you to change the profile password (set to none by default), and edit network
security credentials/settings you have previously configured. The profile password prevents
unauthorized access to the previously entered network security credentials. To change the
profile password, select Change profile password, enter the password and select Change.
Or select Delete to remove the password.
To change the network security credentials, select Edit Networks, and select the network to
edit. AirCheck supports the following encryption format: Open, WEP, Legacy 802.1X, WPA
Personal, WPA2 Personal, WPA Enterprise, and WPA2 Enterprise.
AirCheck does not support Cisco LEAP authentication or Cisco PPK (Per-Packet
Keying).
Load profile - Loads a previously saved profile. Profiles contain all the tester configuration
settings including SSID security credentials.
Save Profile - Saves the current settings to a profile file. You can change the default name
shown at the bottom of the screen by pressing Edit.
Edit Targets - Allows you to select or deselect pinged targets when running AutoTest. The
available targets are: Default Gateway, DHCP Server, Primary and Secondary DNS. The
default gateway and the DHCP server are selected by default.
You have the ability to add your own IP targets. Select
IP address directly on the tester. See page 33. AirCheck Manager also allows you to add a
your own target. See the AirCheck online help for additional information
Note

Add to provide a hostname or an
.