Fluke AIRCHECK User Manual page 24

AirCheck Wi-Fi Tester
Users Manual
Are there new access points in the area?
Are they your access points, your
neighbors, or a rogue?
What wireless clients use the network?
16
Use the device authorization status (ACL) feature to automatically report when
new access points are discovered at your location. To make use of this feature,
configure access point authorization status for each access point (e.g.
authorized or neighbor), next, set the default authorization status to
Unknown. As a result, the default authorization status of
assigned to any access points not previously discovered. Lastly, select Access
Points from the home screen to see any access points marked as
Alternatively, save the test session which includes the list of discovered access
points. Use AirCheck Manager to compare the access point list to a previously
saved session file to see if additional access points have been discovered.
To specify a default device authorization of either unknown or authorized, select
Tools > Set Device Authorization (ACL) default
From the home screen, select Networks, select a network and drill into the Access
Point Details screen, then select Clients. You can also drill into the Access Point
Details screen from many locations to see the clients associated with any
specific access point.
To see all clients, includes those connected and probing on all networks within
tester range: select Clients from the home screen.
Unknown will be
Unknown.
.