To save the current settings as a profile
Select Tools > Manage profiles / network passwords,
1
then select Save profile.
• To save the profile with the filename shown, press
Save. The tester saves the profile in the
"PROFILES" folder.
• To overwrite a profile that is saved on the tester,
highlight the profile, press
press
OK.
• To edit the filename, press
File names can have a maximum of 8 characters
with an extension of 3 characters. The extension
must be ".ACP" if you want to see the profile in
AirCheck Manager.
• To delete characters in the filename, press
Delete.
• To add characters to the filename, use
highlight a character, then press
• To move the cursor in the filename, highlight the
filename, then press
L
, press
Save, then
Edit.
Note
L
.
.
• To save the profile with the edited filename, press
Save. The tester saves the profile in the
"PROFILES" folder.
to
Set Up the Tester
31