AirCheck Wi-Fi Tester
Users Manual
Choose Manage profiles / network passwords.
2
Select Edit targets.
3
Press
Add.
4
Choose Select IP address or Select Hostname.
5
If you chose Select IP address, provide an IP address,
6
press
Done. when you are finished.
To navigate, use the
numeral. Press the
key to move to the right octet or
the
key to move to the left.
If you chose Select Hostname. Enter a hostname and
7
press
Create when finished. An example of a
hostname is: Flukenetworks.com
To select individual characters, use
navigate to a character, then press
process for every new character. To enable the Caps
Lock, select either one of the two capitalized "A-Z"
keys. To add a numeral or a symbol, navigate to the left
shift key and press
L
. To delete a character, position
your cursor on the content line, in the back of the
character that you want to delete, and press
Delete.
34
to scroll to the desired
and
to
L
. Repeat the
To Add a TCP Connect Target
Follow the steps as outlined in the "To Add a Ping
1
Target" procedure and also add a port number as
follows.
Go to the Edit Targets screen (Tools > Manage profiles /
2
network passwords > Edit Targets).
Move the highlight to the Port field of your desired User
3
Target.
To navigate, use the
Press
L
when the highlight is in the desired position.
4
Provide a port number and press
5
are finished.
To navigate, use the
choose a numeral. Repeat for every new numeral. To
delete a numeral, position your cursor on the content
line, in the back of the numeral that you want to delete,
and press
Delete.
To Add a Ping or a TCP Connect Target to AutoTest
One user target can be included in AutoTest per profile. A
connection to the user target will be made whenever an
AutoTest is initiated. When AutoTest runs, it
and the
.
Done when you
L
and the
, press
to
walks
through