Fluke AIRCHECK User Manual page 38

AirCheck Wi-Fi Tester
Users Manual
•
All 802.11 settings (For example, Enable 2.4 GHz band
and Enable 5 GHz band. See page 38.)
• Country
• AutoTest settings
• Threshold settings for bar graphs
If you save the profile while you use it on the tester, the
tester adds these settings to the profile:
•
The sound setting for the locate function
•
The auto shutoff setting
• Sequences for the sort order for lists of networks,
access points, and clients
To transfer a profile from a PC to the tester
Use the Profile Setup in AirCheck Manager to make a
1
profile.
Use the USB cable supplied with the tester to connect
2
the tester to the PC.
Use the transfer function in the Profile Setup to
3
transfer the profile to the tester.
30
To load a profile that is in the tester
From the home screen, press
1
L
Highlight and press
2
Highlight a profile and then press
3
Or
Select Tools > Manage profiles / network passwords,
1
then select Load profile.
Highlight a profile, press
2
If the file is not a valid profile, or if the extension is
not ".ACP", the tester shows the message "Unable
to load selected profile".
Enter the password for the profile, if necessary.
3
You only need to enter the password the first time
you load a profile on the tester. To put password
protection on all profiles again, select Tools >
Restore factory defaults.

Profiles.
Load profile.

Load
L 
, then press
Load.
Note
Note