Fluke AIRCHECK User Manual page 69

Table 4. 802.11n Capabilities (shown on the Access Points Details screen) (continued)
Max Rx Rate The maximum rate of data reception for the access point at this time. The rate can
change as the access point adjusts for changes in wireless traffic in the area.
• 20 MHz or 40 MHz: The width of the channel that is necessary to get the
maximum rate.
•
X streams: The number of data streams that the access point uses to get the
maximum rate.
• 1/2 GI: The access point uses a short guard interval (400 ns instead of 800 ns) to
get the maximum rate. For example, a short guard interval can increase the rate
of reception from 270 to 300.
Notes for Networks and Access Points
61