Locate Client Screen - Fluke AIRCHECK User Manual

AirCheck Wi-Fi Tester
Users Manual
A
B
E
G
Figure 24. Locate Client Screen

The MAC address of the client. The address starts with a
vendor abbreviation prefix, if the prefix is available. See
"oui_abbr.txt" on page 90.

The name, channel, and frequency of the access point
that the client uses for the network connection.

The strength of the signal from the client. The display
shows "---" if the tester cannot hear the client.

The channel that the tester is monitoring for locating.
82
C
F
H I
ffy18.eps
To change this channel, press

A graph of the signal strength over time. If the tester
cannot hear the client, the line does not show.

A gauge that shows the signal strength at the current
time. The bar is gray if the tester cannot hear the client.

The channel that the tester monitors. See .
The color of the bars shows the status of the country
code for the regulatory domain. See "802.11d
Operation" on page 43

The number of access points that the tester has
found. This number does not include virtual access
points if Group virtual access points is selected. See page
38.
 
Press Mute to turn off the sound.
 
.