Wireless Devices - Fluke 154 User Manual

Users Manual
Setting
Default Shows the default modem. Select Reset to remove the default modem.
Modem To set a new default modem, see
Select the appropriate box to set the Primary Master or Secondary
Hart Master
Master for Multi-master systems.
Select to change the Polling Address to look for Devices on Multi-drop
Polling networks. The default address is Polling Address 0. If there are more
Address addresses than can fit in the window, scroll to see the complete list of
Polling Addresses.
Select to change the language of the DD data.The default language is
Language English. If the selected language is not available in the DD, English is
used.

Wireless Devices

You can view available wireless devices, view the Modem that is connected, or
connect to a new Modem.
To connect to another Modem:
1. Turn on the new Modem.
2. Tap Wireless Devices to view a list of available wireless devices.
3. If the Modem is not on the list of available devices, tap SCAN.
A list of available devices shows.
4. If the Modem is on the list of available devices, select the new Modem.
When more than one modem is in the same area, multiple HART Modems are
listed. It may require trial and error to determine which modem is connected.
Table 4. App Settings
Description
Wireless
Note
10
Devices.