Fluke AIRCHECK User Manual page 63

 
Notes: Press to scroll to the notes field. The tester
adds notes automatically. See page 58. Access points
that have notes are purple.
(...): The access point has multiple notes. To see all notes,
go to the Access Point Details screen.

: Sort 1, descending and ascending sequences
: Sort 2, descending and ascending sequences
To sort the list in ascending or descending sequence, use
 and   to highlight a column heading, then press
L 
or Sort 1. For example, to quickly find the access
point that has the strongest signal, highlight
the top of the column, then press
puts the access point with the strongest signal at the top
of the list.
To sort in a secondary sequence, highlight a different
column heading, then press

The SSID filter icon is only shown when Enable SSID
filtering is selected in Tools > Manage 802.11 Settings >
Enable SSID filtering. See page 47.
 
Press Connect to connect to the highlighted access
point. See page 68.
The connect button shows as "Connect*" if the tester
cannot connect to the highlighted access point. See
at
L or  Sort 1. This

Sort 2.
Discover Networks and Access Points
page 68.
To connect to a secure access point, the tester must have
a profile that includes security credentials. See page 29.

The channel that the tester currently monitors.
The color of the bars shows the status of the country
code for the regulatory domain. See "802.11d
Operation" on page 43

The number of access points that the tester
hears at your location. This number does not include
virtual access points if Group virtual access points is
selected. See page 39.
Up to 500 access points can be stored in the access point
database on the tester. When the access point icon turns
yellow, this indicates that greater than or equal to 400
access points have been discovered.
When the icon turns red, this indicates that 500 or more
access points have been discovered and the access point
database is full. Any new access points seen will not be
included in the list.

Press  ACL to change the authorization status for
the highlighted access point. See page 45.
To see details for an access point, highlight the access point,
L
then press . See Figure 15.
55