The Fi-In App; Download And Connect To The App - Fluke FiberInspector Pro FI-3000 User Manual

Hide thumbs Also See for FiberInspector Pro FI-3000:

Table of Contents

The FI-IN app

The FI-IN app works with Apple

for download from the Apple App Store

App on smart phones or tablets.

For a list of mobile devices that fully support the App, visit the Fluke

Networks website.

The Probe cannot connect to a mobile device that has a VPN

connection. If needed, disconnect the mobile device from the VPN

connection.

To use the App with the Probe (See Figure 6.):

Download the App.

On the Probe, push

On the mobile device:

Go to Settings > Wi-Fi.

Select the Wi-Fi network that begins with FI-3000.

If your mobile device shows a message that there is no internet access,

stay connected to the probe.

Open the App.

In the Password field, enter 1234567890.

The password is the same for all probes. You cannot change the

password.

Some mobile devices disconnect from the probe if you do not use the probe for

several minutes.

To reconnect to WiFi from within the App:

Tap the WiFi Connection Indicator. See Figure

Select the Wi-Fi network that begins with FI-3000.

and Android™ products. The app is available

Note

for ≥2 seconds.

Note

and Google Play™. You can use the

and Table 4.

Table of Contents