Fluke AIRCHECK User Manual page 76

AirCheck Wi-Fi Tester
Users Manual
From the home screen, select Tools, then select Manage
1
profiles / network passwords.
Select Load profile, highlight the correct profile, press
2
L 
, then press Load.
Or
Press  Profile from the home screen and then Load
3
profile.
To connect to a network
If the network is secure, you must load a configuration
1
profile that has security credentials for the network. See
page 29.
From the home screen, select Networks.
2
Highlight the network in the Networks (SSIDs) list, then
3

press Connect.
To connect to a specified access point
If the access point is secure, you must use a
1
configuration profile that has security credentials for
the access point. See page 29.
From the home screen, select Access Points.
2
68
Highlight the access point in the Access Points list, then
3
press  Connect.
To do a ping or a TCP Port Connect test
Connect to a network or access point, then press
1
Start tests.
Ping or TCP Port Connect test targets can be added by
selecting Tools > Manage profiles / network passwords
> Edit targets > Add. You can add a target with an IP
address or hostname (URL).
If an * is on the right of Connect, this indicates
security has not been configured on the tester for
that network. Press Connect* and you are guided
through entering the security settings.

Note