Use The Aircheck Manager Pc Application For The Best Performance; Profile Benefits - Fluke AIRCHECK User Manual

Use the AirCheck Manager PC
Application for the Best Performance
To get the most performance from your tester, use AirCheck
Manager to upgrade the AirCheck tester firmware, view
measurement results saved as session files, generate reports
on session files, setup the tester configuration and save it to
a profile, and transfer the profile to the tester.

Profile Benefits

A profile allows the tester to do these tasks:
• Connect to networks that require security credentials.
Security credentials can be entered on the tester or
through the AirCheck Manager software.
• Show the correct authorization status for each access
point. This lets you quickly see which access points are
authorized parts of the network.
• Setup key network devices to Ping and run a TCP Port
Connect test. You should configure security credentials
for the network(s) containing any key devices that you
are pinging.
See "Using AutoTest to Diagnose Your Network Health" on
page 23. Also use the AirCheck Manager online Help for
instructions.

Use the AirCheck Manager PC Application for the Best Performance

Figure 3. AutoTest Results Viewed in AirCheck Manager
ffy29.bmp
11