NEC EXPRESS5800/120Rc-2 Service Manual page 112

6. Remove the hard disk drive peripheral bay by pushing in on the rail clips
and then pulling the bay completely out of the system (Figure 4-41).
Figure 4-41. Removing the Hard Disk Drive Bay from the System
7. Remove the slide rails from the hard disk drive bay removed in the last step.
See Figure 4-42, A.
A
Figure 4-42. Removing Slides from the Hard Disk Drive Bay
8. Install the slide rails removed in the last step to the removable media device
you are installing. See Figure 4-43.
4-36 Disassembly and Reassembly
A