Option Boards
This section describes how to install and remove PCI option boards. The PCI
I/O board plugs into the system board and has four PCI bus expansion slots. The
PCI I/O board is shown in Figure 4-22. Option boards plugged into PCI slots 1,
2, and 3 may be accessed from the rear of the system in order to connect
external cables. An option board plugged into PCI slot 4 is reserved for boards
that do not require external cable connections. PCI 4 may be used for installing
a RAID controller. Refer to Table 4-1 for recommended PCI option board
locations.
PCI 3
PCI 2
PCI 1
Recommended PCI Option Board Locations
Option Board
st
1
Intel Pro100+ LAN Board
nd
2
Intel Pro100+ LAN Board
nd
2
EMULEX LP850 Host Bus Adapter
rd
3
Intel Pro100+ LAN Card
st
1
EMULEX LP850 Host Bus Adapter
SecuRAID 110 Controller
SecuRAID 530 Controller
A
A
64 Bit/33 MHz/5V PCI Connector Slots
B
I/O Board
C
32 Bit/33 MHz/5V PCI Connector Slots
Figure 4-22. I/O Board PCI Connector Slots
Table 4-1. PCI Option Board locations
B
C
Recommended PCI Slot Location (See Figure 4-20)
PCI 3
PCI 2
PCI 1
PCI 4
PCI 1 or PCI 2
Disassembly and Reassembly 4-21
PCI 4