Using This Guide - NEC EXPRESS5800/120Rc-2 Service Manual

Using This Guide

Welcome to the Server 120Rc-2 Service Guide.
This service guide includes all the information found in the E
Guide and includes disassembly and reassembly instructions for all field replaceable units
(FRUs). This service guide also contains system board input/output connector
specifications, system cabling, and a complete parts list, including an exploded view of the
system.
If you have any comments regarding this service reference or if you think something needs
to be changed, please contact us. Limit your comments to issues concerning the
documentation only, and indicate which service reference you are referring to. For all other
service related issues, use your normal feedback channels.
This guide contains the following information:
!
Chapter 1, "System Overview" provides an overview of your system and describes your
system's major system components. See this chapter to familiarize yourself with your
system.
!
Chapter 2, "Setting Up Your System" tells you how to select a site, unpack the system,
assemble the rack-mount subsystem, make cable connections, and power on your
system.
!
Chapter 3, "Configuring Your System" tells you how to configure the system and
provides instructions for running the BIOS Setup Utility and the Adaptec Configuration
Utility, which is used to configure SCSI devices in your system. This chapter also
provides information on system board jumper settings.
!
Chapter 4, "Disassembly and Reassembly" provides you with instructions for removing
and replacing all Field Replaceable Units (FRUs) in your system.
!
Chapter 5, "Problem Solving" contains helpful information for solving problems that
might occur with your system.
!
Chapter 6, "Illustrated Parts Breakdown" contains the exploded view and parts lists for
the server's major assemblies. Part numbers are also provided for optional hardware.
!
Appendix A, "System Cabling" includes cabling information for the two onboard SCSI
controllers, the onboard IDE controller, and the optional RAID controllers.
!
Appendix B, "Technical Specifications" provides specifications for your server system..
!
Appendix C, "Connectors" provides pin information of input/output connectors located
on the system board.
!
"Glossary" defines the standard acronyms and technical terms used in this manual.
!
"Equipment Log" provides you with a sample equipment log for documenting the
system configuration and future updates you may make to your system.
5800 120Rc-2 User's
XPRESS
Using This Guide vii