Figure 4-43. Installing Slides on a Removable media Device
9. Install the CD-ROM/diskette device carrier into peripheral bay 5 by pushing
the carrier into the bay until a distinct click is heard as the drive rail clips
engage. See Figure 4-44.
Figure 4-44. Installing the CD-ROM/Diskette into Bay 5.
10. Connect the CD-ROM/diskette signal and voltage cables. See
Figure 4-45.When installing the diskette signal cable, you must first push up
on the cable lock (A) before installing the ribbon cable (B) into the
connector. Once the ribbon cable is in the connector , push down on the
cable lock to secure the cable. Install the CDROM signal cable (C) and the
voltage cable (D).
Disassembly and Reassembly 4-37