Specific Problems And Corrective Actions; Power Led Does Not Light - NEC EXPRESS5800/120Rc-2 Service Manual

Hide thumbs Also See for EXPRESS5800/120Rc-2:
Table of Contents

Advertisement

Specific Problems and Corrective Actions

This section provides possible solutions for the following specific problems:

Power LED does not light

!
No beep or incorrect beep pattern
!
No characters appear on screen
!
Characters on the screen appear distorted or incorrect
!
System cooling fan does not rotate
!
Diskette drive activity LED does not light
!
Hard disk drive activity LED does not light
!
CD-ROM drive activity LED does not light
!
Problems with application software
!
The startup prompt "Press <F2> key if you want to run Setup" does not appear on
!
the screen.
The bootable CD-ROM is not detected.
!
Try the solutions in the order given. If you cannot correct the problem, contact your
service representative for assistance.
Power LED Does Not Light
Check the following:
Is the system operating normally? If so, the power LED is probably defective.
!
Are there other problems with the system? If so, check the items listed under System
!
Cooling Fans Do Not Rotate.
Problem Solving 5-9

Advertisement

Table of Contents
loading

Table of Contents