NEC EXPRESS5800/120Rc-2 Service Manual page 91

The thermal tape is very delicate and tears easily. Handle
with extreme care.
12. Install the thermal tape square onto the top of the processor in the exact
position shown in Figure 4-13.
Figure 4-13. Installing Thermal Tape
13. Place the heat sink on top of the processor.
When performing the next three steps, be sure the heat sink
is held firmly in position. If the heat sink should slide across
the top of the processor, the thermal tape may be damaged.
14. Position the heat sink clip over the center of the heat sink and attach the
small end of the clip to the tab located on the base of the ZIF socket. See
Figure 4-14.
Figure 4-14. Positioning the Heat Sink Clip
! CAUTION
! CAUTION
Disassembly and Reassembly 4-15