NEC EXPRESS5800/120Rc-2 Service Manual page 40

Note:
system rack cabinet.
11. Remove the outer bracket adjustment screws in the left slide rail assembly
(viewed from the rear of the system cabinet) and install the cable arm
assembly. See Figure 2-9. Tighten all screws.
Figure 2-9. Installing the Cable Arm Assembly
12. Tighten the outer bracket adjustment screws (8) in the right slide rail
assembly. See Figure 2-6, A.
13. Attach the cable arm bracket to the rear on the server as shown in
Figure 2-10.
Figure 2-10. Installing the Cable Arm Bracket
2-12 Setting Up the System
The next step is performed at the rear of the