NEC EXPRESS5800/120Rc-2 Service Manual page 134

Figure 4-66. Removing the CD-ROM/Diskette Device Carrier Slide Rails
8. If you are replacing the diskette device, remove the three screws securing
the device to the carrier; if you are replacing the CDROM derive, remove
the four screws securing the device to the carrier.
9. Install the replacement device into the CDROM/diskette device carrier.
10. Install the slide rails onto the device carrier. See Figure 4-66.
11. Install the CD-ROM/diskette device carrier into the peripheral bay by
pushing the carrier into the bay until a distinct click is heard as the drive rail
clips engage. See Figure 4-67.
4-58 Disassembly and Reassembly
Figure 4-67. Installing the CD-ROM/Diskette