DIMMs
The system board contains four DIMM sockets labeled 1 through 4
(Figure 4-19). Each socket can hold a single 72-bit DIMM module with 64MB,
128MB, 256MB, 512MB, or 1GB of memory. When all four sockets are
populated, the system board supports a maximum of 4 GB of memory with 1GB
DIMMs. A DIMM will always be installed in socket 1. When you install
additional DIMMs, you must start with the first empty socket next to the
DIMMs already installed. When you remove DIMMs, you must start with the
highest number occupied DIMM socket on the system board.
4-18 Disassembly and Reassembly
1
2
3
4
Figure 4-19. DIMM Locations