HEATING AND VENTILATION
1-35
,
3. Remove cable retainer clip and remove cable. On left
2. Remove kick pad air outlet grille.
hand side, remove the cable from additional routing
clip.
3. Disconnect cable at ventilator door.
4. To replace, reverse removal procedure.
4. Loosen door sill plate to gain access to rear edge of
kick pad.
REMOVE AND REPLACE
-
G AND A SERIES
5. On models with upper ventilation disconnect upper
vent cable.
1. On left side only, remove park brake bracket mount-
6. Remove kick ad screws and oosition outward to
ing screw at instrument panel.
gain access to vent cable retainer clips.
VENT
CONTROL
Fig. 1-33 B Series Upper (Center) Ventilation Duct and Controls