Pontiac FIREBIRD 1972 Service Manual page 865

7C-8 1972 PONTIAC SERVICE MANUAL
Fig. 7C-13 Removing 3rd and 4th Synchronizer and 3rd
Speed Gear
:LEANING AND INSPECTION
Fig. 7C-15 Removing Rear Bearing and 1st Speed Gear
TRANSMISSION CASE
FRONT AND REAR BEARINGS
1. Wash transmission case thoroughly inside and out-
side with cleaning solvent, then inspect for cracks.
2. Check front and rear faces of case for burrs and, if
present, remove them with a fine mill file.
_I
1. Wash front and rear ball bearings thoroughly in a
cleaning solvent.
2. Blow out bearings with compressed air.
Fig. 7C-14 Removing Rear Bearing Snap R ~ n g
Fig. 7C-16 Removing 1st and 2nd Synchronizer Snap Ring