Pontiac FIREBIRD 1972 Service Manual page 941

7E-52 1972 PONTIAC SERVICE MANUAL
OLLER
SSEMF
R E AC
CARR
CLI
ILY
JTCH.
SUN
GEAR
PLASTIC GEAR
A
I N G
OUTPUT
-
CARRIER
Fig. 7E-84 Disengaging Snap Ring from Output Carrier
Fig. 7E-82 Removing Reaction Carrier Assembly
TRANSMISSIONS WITH NYLON SPEEDOMETER
DRIVE GEAR
a. Depress retaining clip and slide gear off the out-
put shaft (Fig. 7E-85).
b. To install, place retaining clip (square end toward
flange of shaft) into hole in output shaft (Fig.
7E-86). Align slot in speedometer drive gear with
retaining clip and i n s h gear.
-
NOTE: The nylon speedometer drive gear is
installed at the factory only. All service replace-
ment speedometer drive gears are steel. When
Fig. 7E-85 Removing Retaining Clip
SPEEDOMETER DRIVE
GEAR CLIP
Fig. 7E-83 Removing Sun Gear
Fig. 7E-86 Installing Retaining Clip