Pontiac FIREBIRD 1972 Service Manual page 957

7E-68 1972 PONTIAC SERVICE MANUAL
\
DIRECT C L U
SNAP RlNG
SNAP RlNG
INTERMEDIATE CLUTCH RETAINER
\
INTERMEDIATE CLUTCH OUTER RACE
TERMEDIATE ROLLER CLUTCH
DIRECT CLUTCH HOUSING
A N D RACE ASSEMBLY
V
b l R E c T CLUTCH CENTER SEAL
\
DIRECT CLUTCH OUTER SEAL
\
DIRECT CLUTCH INNER SEAL
DIRECT CLUTCH PISTON
CLUTCH PISTON RELEASE SPRINGS
TCH SPRING RETAINER
Fig. 7 E - 1 2 9 Exploded View of Direct Clutch Piston and Intermediate Roller Assembly
3. Install a new clutch center seal on hub of direct
clutch housing with lip of seal facing up (Fig. 7E-
132).
NOTE: When installing the piston, make cer-
tain that the proper piston is used. The direct
1
I
Fig. 7 E - 1 3 0 Installing Clutch Piston Inner Seal
clutch piston can be identified by the check ball
installed in the casting (Fig, 7E-120).
4. Place seal protectors, Tools J 21362 Inner and J
21409 Outer, over hub and clutch housing and install
clutch piston with a rotating motion (Fig. 7E-133)
Fig. 7 E - 1 3 1 Installing Clutch Piston Outer Seal