6-56
1972 PONTIAC SERVICE MANUAL
GTO
W1455
MOTOR BRACE
2. Drain cooling system.
Fig. 6-92 Engine Insulators
-
V-8
A Series
3. Scribe alignment marks on hood around hood hinges
and remove hood from hinges.
4. Disconnect engine wire harness and engine to body
ground straps.
5. Remove air cleaner.
6. Disconnect radiator and heater hoses at engine.
7. If equipped with power steering or air conditioning,
remove pump and compressor from mounting brack-
ets and set aside. Do not disconnect hoses.
8. Remove engine fan and pulley.
9. Disconnect accelerator control linkage and move ca-
ble to one side.
10. Disconnect transmission vacuum modulator line (au-
tomatic) and power brake vacuum line at carburetor
and fold back out of way.
11. Raise vehicle and drain crankcase.
12. Disconnect fuel lines at fuel pump.
'13. Disconnect exhaust pipes from manifolds.
14. Disconnect starter wires.
15. If equipped with automatic transmission, remove