Table of Contents
Advertisement
Figure 68. Installing a mezzanine card filler bracket
Next steps
1.
Install the expansion card riser assembly.
2.
Install the sled into the enclosure.
3.
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing a sled
Removing the expansion card riser assembly
Installing the expansion card riser assembly
Installing a sled
After working inside your system
System battery
The system battery is used to power the real-time clock and storing the BIOS settings of the system.
NOTE: There is a system battery in each of the sleds.
122
Advertisement
Table of Contents
Troubleshooting
