Installing The Hard Drive Backplane - Dell PowerEdge C6320p Owner's Manual

Hide thumbs Also See for PowerEdge C6320p:
Table of Contents

Advertisement

Figure 114. Removing the backplane from the hard drive cage
Next steps
1.
Install the hard drive backplane.
2.
Install the hard drives.
3.
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing a hard drive carrier

Installing the hard drive backplane

Installing a hard drive carrier
After working inside your system
Installing the hard drive backplane
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
CAUTION: To prevent damage to the drives and backplane, you must remove the hard drives from the system before
removing the backplane.
CAUTION: You must note the number of each hard drive and temporarily label them before removal so that you can
replace them in the same locations.
NOTE: You must route the cables properly through the tabs on the chassis to prevent them from being pinched or
crimped.
1.
Follow the safety guidelines listed in the Safety instructions section.
166

Advertisement

Table of Contents
loading

Table of Contents