Dell PowerEdge C6320p Owner's Manual page 49

Option Description
Port F Sets the drive type of the selected device. For Embedded SATA settings in ATA mode, set this field to Auto
to enable BIOS support. Set it to OFF to turn off BIOS support.
For AHCI mode, BIOS support is always enabled.
Option
Model
Drive Type
Capacity
Port G Sets the drive type of the selected device. For Embedded SATA settings in ATA mode, set this field to Auto
to enable BIOS support. Set it to OFF to turn off BIOS support.
For AHCI mode, BIOS support is always enabled.
Option
Model
Drive Type
Capacity
Related links
SATA Settings
Viewing SATA Settings
Boot Settings
You can use the Boot Settings screen to set the boot mode to either BIOS or UEFI. It also enables you to specify the boot order.
Related links
Boot Settings details
System BIOS
Viewing Boot Settings
Choosing the system boot mode
Changing the boot order
Viewing Boot Settings
To view the Boot Settings screen, perform the following steps:
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Boot Settings.
Related links
Boot Settings
Boot Settings details
Choosing the system boot mode
Changing the boot order
Description
Specifies the drive model of the selected device.
Specifies the type of drive attached to the SATA port.
Specifies the total capacity of the hard drive. This field is undefined for removable
media devices such as optical drives.
Description
Specifies the drive model of the selected device.
Specifies the type of drive attached to the SATA port.
Specifies the total capacity of the hard drive. This field is undefined for removable
media devices such as optical drives.
49