Related links
Safety instructions
Before working inside your system
Removing a sled
Removing the expansion card riser assembly
Installing a mezzanine card
Installing a mezzanine card filler bracket
Installing the expansion card riser assembly
Installing a sled
After working inside your system
Installing a mezzanine card filler bracket
Prerequisites
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
Remove the sled from the enclosure.
4.
Remove the expansion card riser assembly.
5.
Keep the Phillips #1 screwdriver ready.
Steps
1.
Install the mezzanine card filler bracket into the sled.
2.
Secure the mezzanine card filler bracket with screws.
121