Table of Contents
Advertisement
4.
Keep the Phillips #1 screwdriver ready.
Steps
1.
Connect the control panel cable to the control panel.
2.
Push aside the retention hooks on the control panel assembly and place the control panel into the control panel assembly.
3.
Install the control panel assembly into the hard drive cage.
Figure 120. Installing the left side control panel
Figure 121. Installing the right side control panel
4.
Install the screws that secure the control panel assembly to the hard drive cage.
5.
Install the screws that secure the control panel assemblies to the chassis.
172
Advertisement
Table of Contents
Troubleshooting
