Fault Table - Skoda Octavia Workshop Manual

01
Test of vehicle systems
Select function XX
Fault number: 00515
Hall sender -G40-
Short to earth
Test of vehicle systems
Fault memory is erased
------------ 01-6 ------------
Self-Diagnosis
HELP
K Readout in display:
- Press 06 to select the function „End data
transfer“ and confirm the entry with the key
Q.
If one or several faults are stored:
K Readout of fault number in display, e.g.:
→
- Press → key.
K Readout of source of fault with type of fault in
→
display, e.g.:
- Press → key.
K Readout in display:
HELP
- Press 06 for the function „End data transfer“
and confirm entry with the key Q.
- Rectify the faults displayed by referring to the
fault table ⇒ page 01-9.
Note:
When carrying out test and removal and instal-
lation work, our control modules may also de-
tect faults such as connectors unplugged. For
this reason, it is necessary to interrogate and
erase the fault memories of all the control units
after concluding the work. Follow the procedure
below:
- Press the key 0 twice for the address word
00 „Automatic test sequence“ and confirm
the entry with the key Q. V.A.G 1552 trans-
mits all the known address words one after
the other.
- Erase fault memory ⇒ page 01-7.
Erasing fault memory
Special tools, testers and aids required
♦ Vehicle system tester V.A.G 1552 with cable
V.A.G 1551/3
Test condition
l Repairs carried out
- After rectifying all the faults, you then have
to carry out a road test.
The following operating conditions should be
met during this road test:
OCTAVIA
Edition 11.96
S00.5107.51.20