OCTAVIA
Test of vehicle systems
Select function XX
Read measured value block
Enter display group number XXX
Read measured value block 19
800 rpm
1.45 ms
Edition 10.99
S00.5107.53.20
Fuel Formation/Fuel Injection
HELP
→
1011 0
9.0° BTDC
Testing signal
(Models from Model Year 1998)
t
testers and aids
♦ Vehicle system tester V.A.G 1552 with cable
V.A.G 1551/3
Test rocedure
-
Connect vehicle system tester V.A.G 1552
and select the engine electronics control unit
with the address word 01. Engine must be
idling for this step.
(Connecting vehicle system tester and se-
lecting engine electronics control unit ⇒ page
01-3.)
K Readout in display:
-
Press keys 0 and 8 for the function Read
measured value block and confirm the en-
try with the key Q.
K Readout in display:
-
Press keys 0, 1 and 9 for Display group
number 19 and confirm the entry with the
key Q.
K Readout in display:
-
Observe the readout in display block 3.
Specification: 1xxx x
-
Turn the steering wheel to full lock and ob-
serve the readout in display block 3 (1. digit
from left).
Specification: 0xxx x
-
Press the → key.
-
Press keys 0 and 6 for the function End
output and confirm the entry with the key Q.
-
Switch the ignition off.
24
steering
------------
------------