Skoda Octavia Workshop Manual page 189

OCTAVIA
Edition 11.96
S00.5107.51.20
Ignition System
⇒ Current Flow Diagrams, Electrical Fault
Finding and Fitting Locations binder
Contact assignment of plug connection:
K
1
- Test signal wire of knock sensor 1 -G61 from
contact 1 of connector in engine compart-
ment to socket 68 of test box for continuity.
Specification: max. 1
- Test earth wire of knock sensor 1 -G61 from
contact 2 of connector in engine compart-
ment to socket 67 of test box for continuity.
Specification: max. 1
- Test screening of cable for knock sensor 1
-G61 from contact 3 of connector in engine
compartment to socket 67 of test box for
continuity.
Specification: max. 1
- Test signal wire of knock sensor 2 -G66 from
contact 2 of connector in engine compart-
ment to socket 60 of test box for continuity.
Specification: max. 1
- Test earth wire of knock sensor 2 -G66 from
contact 2 of connector in engine compart-
ment to socket 67 of test box for continuity.
Specification: max. 1
- Test screening of cable for knock sensor 2
-G66 from contact 3 of connector in engine
compartment to socket 67 of test box for
continuity.
Specification: max. 1
K - If the specifications are not achieved, rectify
any open circuit in the wiring or short circuit.
2 3
------------
28
------------