Startup Display And Display Elements; Startup Display - Omron FQ2-S/CH Series User Manual

Smart camera

Hide thumbs Also See for FQ2-S/CH Series:

Table of Contents

1-4 Startup Display and Display Elements

When the Sensor and Touch Finder are powered on,

the language selection display appears and then the

Sensor List.

Select the Sensor you want to connect, and press [OK].

Sensor connection processing takes place.

If the Sensor is not detected, press the [Sensor List]

button to move to the Sensor List, and check the con-

nection settings.

Selecting the Sensors to Connect: p.388

Touch Finder [DHCP] setting is OFF. In the following cases, the Sensor List will not appear.

The screen of Step 4 is displayed immediately after you turn on the power.

• The Sensor to be connected is already set

• "Auto sensor detection" is set to ON

• "Specify sensor" is set to ON

FQ2-S/CH User's Manual