Increasing Processing Speed For Edge Position - Omron FQ2-S/CH Series User Manual

Item
Detection mode
Beginning
position
Note
It is also possible to check the extraction colors or specify them using the color palette.
The RGB values of the extraction color can be checked and adjusted using the color palette.
] − [Color palette], a color palette will appear.
If you press [

Increasing Processing Speed for Edge Position

Make the measurement region smaller to reduce the processing time.
Changing the measurement region: p. 227
FQ2-S/CH User's Manual
Parameter
Color IN Detects as an edge any position where the color changes from
another color to the specified color.
Color OUT Detects as an edge any position where the color changes from
the specified color to another color.
Beginning
Ending
position
position
Color IN
When a color is pressed on
the color palette, its RGB
values will be displayed.
Inspecting with the Edge Position Inspection Item
Description
Ending
position
Color OUT
279