Performing Test Measurements with Saved Images (Re-measuring)
This Sensor can save measured images in the Sensor's built-in memory or on an SD card. Test measurements
can be performed using these saved images.
This function is useful for adjusting the judgment parameters when objects are not available.
[Test] − [Continuous test] − (Any display)
1
−
Press
2
Select one of the following.
• [Log]: Images that are logged in the Sensor's inter-
nal memory.
• [Logging image file]: Images that are logged in the
SD card.
• [Camera image file]: Images that were saved as
logged images with the
3
The display switches to the saved image and
measurements are taken again.
Saving images: p. 420
FQ2-S/CH User's Manual
.
(Log Image) Button.
Performing Test Measurements
341