Omron FQ2-S/CH Series User Manual page 103

Parameter
Common
(common RGB setting)
Individual
(individual RGB settings)
Brightness range
(for Sensors with
Monochrome Cameras)
Measurement Data That Can Be Used for External Outputs and Calculations
The following values can be used as measurement data and output to external devices via Ethernet or used in
calculations. Measurement data can be specified for each filter item.
Expression t Data name
ext string
JG Judgement This is the judgment result.
FQ2-S/CH User's Manual
Setting
Range: 0 to 255 (Default)
Range: 0 to 255 (Default)
Range: 0 to 255 (Default)
Description
Description
Set the upper and lower limit values of the background
suppression level. The same limits will be used for all
RGB colors.
The range from the specified lower to upper limits is
converted to 0 to 255.
Set the upper and lower limit values of the background
suppression level for each RGB color.
The range from the specified lower to upper limits is
converted to 0 to 255.
The specified range is converted to 0 to 255.
-2: No judgement (not measured)
0: Judgement is OK
-1: Judgement is NG
Adjusting the Images That Were Taken
Data range
101