Charging The Battery - Omron FQ2-S/CH Series User Manual

Charging the Battery

This section describes how to charge and install the FQ2-D31 Battery and provides applicable precautions.
Charge the Battery while it is attached to the Touch Finder.
Use the AC adapter to charge the battery.
Mounting the Battery in the Touch Finder
1
Remove the screw from the battery cover on
the top of the Touch Finder, slide the cover in
the direction of the arrow, and open the battery
cover.
2
Face the rounded side of the battery toward
the back of the Touch Finder and insert the
battery.
Important
Do not insert the battery in the wrong orientation.
3
Close the battery cover, slide the battery cover
in the direction of the arrow, and tighten the
screw on the battery cover.
4
Attach the AC adapter to the Touch Finder to
start changing the battery.
The CHARGE indicator will be lit while the battery
is being charged.
FQ2-S/CH User's Manual
CHARGE indicator
Wiring
65