4-13 Inspecting with the Edge Width Inspection Item
FQ2-S1
FQ2-S2
Edge Width Inspection Item
This inspection item is used to measure dimensions. Places where the color changes greatly are called edges.
The distance between two edges is called the edge width.
Measurement region
Setup Procedure for Edge Width Inspection Item
Step 1
Selecting the Inspection Item
[Inspect]
− [Inspection]
1
Press an unused inspection item number and press [Add item.].
2
Press [Edge Width].
Note
Drag the arrow
282
Inspecting with the Edge Width Inspection Item
FQ2-S3
FQ2-S4
Sample Settings
Color of edge to be found
Registering inspection items: p. 138
at the bottom of the menu upward to display all of the inspection items.
Sample Measurement
Edges are searched from
two directions and the
distance is calculated.
OK
NG
FQ2-S/CH User's Manual