Omron FQ2-S/CH Series User Manual page 219

Step 2 Teaching
Teaching means to store the region and partial image as reference data for the measurement.
[Inspect]
− [Inspection]
1
Press [Teach].
2
Place the object that is to be used as the measurement reference in front of the camera.
3
Move the rectangle to the location to be measured.
4
Press [OK].
5
Press [TEACH] on the lower right of the display.
The basic settings will be registered when teaching has been completed.
6
Press [Back] to end teaching.
The following data is stored as the measurement reference.
Item
Model image
Reference position X
Reference data
Reference position Y
Reference Angle
FQ2-S/CH User's Manual
− [Add item.] − [Search] − [Settings] Tab Page
Parameter
This is the partial image that is stored as the reference.
These are coordinates of the model image that are stored as reference.
The angle of the registered model.
Drag a corner to
Drag the rectangle
size the rectangle.
to move it.
Description
Inspecting with the Search Inspection Item
217