Roland sp-404sx Owner's Manual page 19

Connecting a Mic
To use a mic, connect it to the MIC IN jack, then press the [MIC] button so it's lit.
Importing WAVE files from your computer
By using the included "SP-404SX Wave Converter" software, WAV or AIFF files from your computer can be written to an SD
card and assigned to the pads of the SP-404SX.
For details, refer to "Importing Wave Files from Your Computer" (p. 22).
Use the "SP-404SX Wave Converter" software on
your computer to copy the data to SD card
MIC IN jack
Card reader (sold separately)
WAV
AIFF
Load the data from SD
card into the SP-404SX
Press the [MIC] button so it's lit.
MEMO
If you're not using a mic, leave this button
unlit.
Using the built-in mic
If you want to use the built-in mic, don't
connect anything to the MIC IN jack.
The built-in mic won't operate if a mic is
connected to the MIC IN jack.
Howling could be produced depending on the location of
mics relative to speakers. This can be remedied by:
1. Changing the orientation of the mic(s).
2. Relocating mic(s) at a greater distance from speakers.
3. Lowering volume levels.
17