Table of Contents
Advertisement
Table 135 Maintenance > Administration > Diagnostic > Information Collect
LABEL
Size
Download
28.3 The Packet Capture Screen
This screen allows you to log network traffic going through the X2002 LAN or WAN
interface. Click Maintenance > Administration > Diagnostic > Packet Capture to view the
screen as shown.
Figure 276 Maintenance > Administration > Diagnostic > Packet Capture
The following table describes the labels in this screen.
Table 136 Maintenance > Administration > Diagnostic > Packet Capture
LABEL
Machine ID
Interface
Host
Protocol
X2002 User's Guide
DESCRIPTION
This field displays the size of the file.
Click Download to save the file to your computer.
DESCRIPTION
This is a name that is automatically assigned to the X2002.
Choose the interface for which you want to log network traffic.
Optionally, limit the capture of information to communication with a specific
network device. Enter the IP address of the network device that the X2002 is
communicating with. You can also enter the IP address of the X2002 itself, in
which case, the X2002 only collects information where the destination or source IP
matches that of the X2002.
Specify the protocol type which you want to capture information on. You can
choose TCP, UDP, ICMP or select All to capture all IP traffic going through the
X2002.
Chapter 28 Diagnostics
315
Advertisement
Table of Contents
