Table of Contents
Advertisement
Chapter 11 Phonebook
11.1.3 Before You Begin
If you intend to configure the X2002 to use an LDAP phonebook, you need the following
information about the LDAP server on your network to issue an LDAP query from the X2002:
• LDAP Server IP address - this is the IP address of the LDAP server you want to query.
• Port number - this is the port number that the LDAP user to receive LDAP queries.
• RootDN - this is the username used to authenticate with the LDAP server. This
information is configured on the LDAP server. Refer to your LDAP server documentation.
• Password - this is the password used to authenticate with the LDAP server.
• BaseDN - this string identifies the location on the LDAP server where the phone book
information is stored. LDAP directories are divided into subdirectories and you need to
enter the right subdirectory in order to search for the information for your phonebook.
• LDAP Fields - these are the names of the fields on the LDAP database that you want to
obtain information from. Each record on the LDAP database contains many fields and you
need to provide the correct field names in order to obtain the data.
11.2 The Phonebook Configuration Screen
This screen allows you to set up a connection to an LDAP server on the X2002 and to either
import or export your local phonebook. To display, click Configuration > PBX > Server
Configuration > Phonebook.
Figure 129 Configuration > PBX > Server Configuration > Phonebook
The following table describes the labels in this screen.
Table 35 Configuration > PBX > Server Configuration > Phonebook
LABEL
LDAP Phonebook
Configure
LDAP Enable
LDAP Server
150
DESCRIPTION
Use this section to configure your connection settings to the LDAP database
containing the phonebook entries you want to import to the X2002.
Check this box to enable LDAP based phonebook on the X2002.
Specify the IP address of the server containing the LDAP database.
X2002 User's Guide
Advertisement
Table of Contents
