Creating A Dialing Rule For Itsp - ZyXEL Communications X2002 User Manual

Chapter 3 Tutorials

3.3.2 Creating a Dialing Rule for ITSP

In our example we want to use the ITSP1 outbound line group to complete long distance calls.
This is done by configuring the long_distance_call LCR. This figure also shows the
local_call LCR we created in
Figure 46 Outbound Calls via ITSP
1001
To create a dialing rule for ITSP:
1 In the web configurator, click Configuration > PBX > Outbound Line Management >
LCR to open the LCR List screen.
2 Click the Edit icon in the long_distance_call section.
Figure 47 Configuration > PBX > Outbound Line Management > LCR
68
Section 3.2.2 on page 61.
local_call
FXO
long_distance_call
PSTN
ITSP
X2002 User's Guide