Auto-Attendant For Sip Trunks - ZyXEL Communications X2002 User Manual

Ip-pbx
Hide thumbs Also See for X2002:
Table of Contents

Advertisement

Table 83 Configure a SIP Trunk
LABEL
Codec List
Apply
Cancel

18.6.2 Auto-Attendant for SIP Trunks

Use this screen to select which auto-attendant should be used with this outbound line group.
See
Chapter 19 on page 233
configure your DID (Direct Inward Dialing) settings. To display, click the Auto-Attendant
icon in the in the SIP Trunk section of the Outbound Group configuration screen.
Figure 205 AA for SIP Trunks
Each field is described in the following table.
Table 84 AA for SIP Trunks
LABEL
Auto-Attendant
Apply AA
Extension
Number for Fax
Extension
Number
DDI/DID Mapping Setting
Representative
Number
X2002 User's Guide
DESCRIPTION
This column indicates the codec types used by these extensions. You can
organize the priority of the codecs by highlighting it and clicking the Up or Down
buttons to move the codec higher or lower in priority. The SIP extensions attempt
to use the higher priority codecs first and try the lower priority codecs next. You
can remove a codec type from being used from these extension by highlighting it
and clicking the Left button.
Click this to save your changes.
Click this to set every field in this screen to its last-saved value.
for information on configuring auto-attendant. You can also
DESCRIPTION
Select the Auto-Attendant you want to use when calls come in on this outbound
line group. Select FAX if you want to forward all incoming calls on this outbound
line group to a fax machine located at a specific extension. Select Extension if
you want to directly forward all incoming calls through this outbound line group to
an extension or a hunting group number.
This field is only available if you select FAX in the Apply AA field. Type the
extension of the Fax machine you want to forward calls to.
This field is only available if you select Extension in the Apply AA field. Type an
extension or a hunting group number you want to forward calls to.
This field displays the representative number of the SIP trunk if you have
configured one in the SIP trunk setting.
Chapter 18 Outbound Line Group
227

Advertisement

Table of Contents
loading

Table of Contents